• Language:

  • DOUBLE-SHAFT HEADRIG SD400/SD460
    skywood sd 400

    The SD-400 woodcutting machine intended for longitudinal cutting of logs of diameter from 120 to 400 mm on two-edged cant and unedged board. The SD-460 is new version of machine, where you can cut the logs of up to 460 mm in diameter. The SD-400 / SD-460 machines are used as a first line machine in pallet production, as well as in other high capacity wood-processing enetrprises (10-18 m3 per hour).

    The machine is intended for sawing logs in one pass on unprocessed lumber with an accuracy of 0.5 mm. and good surface quality. The machine’s design makes it possible to cut the center of the log. For efficient removal of sawdust, a belt conveyor is installed at the bottom of the machine. In addition, a waste separator is mounted at the end of conveyor, which prevents the particles and sawdust from clogging the aspiration system.

    TECHNICAL CHARACTERISTICS OF SKYWOOD SD-400/SD-460
    Maximum log diameter, mm ………………………………… 400/460
    Minimum log diameter, mm …………………………………. 120
    Minimum log length, mm ……………………………………… 1100
    Saw blade diameter, mm ………………………………………. 550/600
    Shaft diameter, mm ……………………………………………….. 80
    Maximum number of shaft-mounted saws, …………. 7
    Shaft rotation frequency ………………………………………… 1500
    Feed rate, m/min ……………………………………………………… 0-30
    Feed drive, kW …………………………………………………………. 2,2/2*0,37(3.0)
    Top shaft engine capacity, kW ………………………………… 37 (30;45;55;75)
    Lower shaft engine capacity, kW ……………………………. 45 (37;55;75)
    Input productivity m3/h ………………………………………….. 10 и более
    Длина подающего стола, мм ……………………………….. 4 200 (6 200)
    Dimensions, mm Length …………………………………………. 3 662
    Height ……………………………………………………………………….. 1 886
    Width ………………………………………………………………………… 1 690
    Weight, kg …………………………………………………………………. 4 050/4 310
    E-MAIL

    info@sky-wood.com

    OFFICE HOURS:

    Monday to Friday 9:00 to 18:00

    INNOVATIVE TECHNOLOGIES

    SKYWOOD rigs are continuously improved. Today we propose to equip our lines with a hybrid-type cuttings removal system. We can also install a 3D scanner, which records automatically incoming timber.

    OUR SERVICES:

    – sawmill lines
    – headrigs
    – multi-saw rigs
    – flitch processing rigs
    – multi-saw edging rigs
    – intrashop mechanization
    – equipment mechanization nearby rigs
    – maintenance

    WAIT FOR YOU:

    16 Kurskaya str., Kiev, Ukraine, 03049

    Developed by webworks.com.ua © All rights reserved 2016